V2 Context; Remove - Symbol WS5000 Series System Reference Manual

8-264
WS 5000 Series System Reference

8.50 v2 Context

SNMP Context
The v2 context provides commands that configure the SNMP v2 access parameters.
Table 8.55 summarizes the commands within this context. Common commands between multiple contexts are
described in further detail in the
Table 8.55 SNMP v2 Context Command Summary
Command
.. or end Terminate a current session and moves up a context, hierarchically.
exit Terminate a current session and returns to the "root" prompt.
? or help Get the command information.
logout or bye Close this session.
clear Clear the screen.

remove

Remove an SNMP client/community or SNMP trap.
set Set SNMP attributes.
show Display context specific attributes.
8.50.1 remove
v2 Context
Use remove to remove SNMP v2 client.
Syntax
remove <access-perm> <client_ip> <community_name> [port_no]
Parameters
access-perm
client_ip
community_name
port_no
Example
WS5000.(Cfg).SNMP.v2> remove rw 172.34.35.68 symbol
Removing SNMP Client...
Status : Success.
Common Commands section.
Description
The access permission of the SNMP client. Can be one of:
• ro — readonly
• rw — readwrite
IP address of the SNMP client.
Name of the community the client is a member of.
Optional port number. The default is
page 8-7
page 8-7
page 8-7
page 8-8
page 8-8
page 8-264
page 8-265
page 8-265
161
.
Ref.