Debug - Symbol WS5000 Series System Reference Manual

The destination of the file. Possible values are:
destination
• tftp
• ftp
• system
• .
• /
FTP username. Default is anonymous.
user
FTP transfer mode, either ascii or binary. Default is binary.
mode
Example
SM-WS5000> copy tftp system
Enter the file name to be copied from TFTP server : backup.sys.img
IP address of the TFTP server : 157.235.208.208
Copying 'backup.sys.img' from tftp://157.235.208.208 to Switch...

9.2.9 debug

Allows enabling or disabling logging of debug messages in the debug log file. User must execute the debug
command to see the log of the operating function. Entering a specific option displays the debug option that is
enabled.
Syntax
debug [<option> <enable/disable>]
Parameters
Option
enable/disable Error messages.
errors
enable/disable General messages.
general
enable/disable Process thread information.
threads
enable/disable Shared memory data.
sharedmem
enable/disable Access Port information.
accessport
enable/disable ESS handling.
ess
enable/disable policy handling.
policy
enable/disable Ethernet data.
ethernet
enable/disable Statistical data.
stats
enable/disable SNMP data.
snmp
enable/disable Driver messages.
driver
enable/disable Standby information.
standby
enable/disable Frame information.
frames
Parameters
Service Mode CLI
Descriptions.
9-9