Wvpn Context; Auth - Symbol WS5000 Series System Reference Manual

8.67 WVPN Context

The commands mentioned under this context are used to configure system WVPN settings.
summarizes the commands within this context. Common commands between multiple contexts are described
in further detail in the Common Commands
Table 8.72 WVPN Context Command Summary
Command
.. or end Terminate a current session and moves up a context, hierarchically.
exit Terminate a current session and returns to the "root" prompt.
? or help Get the command information.
logout or bye Close this session.

auth

Configure authentication settings.
cert Configure certicate settings.
clear Clear the screen.
ddns Configure DDNS settings.
directory Display the uploaded WVPN files from local repository.
disable Disable the WVPN service.
enable Enable the WVPN service.
ip_pools Configure ip pool settings.
rt See VPN runtime session info.
set Configure WVPN general attributes.
show Display context specific attributes.
wtls Configure system WTLS settings.
8.67.1 auth
WVPN Context
This command is used to configure authentication settings.
Syntax
auth
Parameters
None
Example
WS5000.(Cfg).wvpn> auth
Authentication Management:
Simple authentication:
section.
Description
: Enabled
8-319
CLI Command Reference
Table 8.72
Ref.
page 8-7
page 8-7
page 8-7
page 8-8
page 8-319
page 8-320
page 8-8
page 8-321
page 8-321
page 8-322
page 8-322
page 8-323
page 8-323
page 8-324
page 8-324
page 8-326