Classification Group (Cg) Context; Add - Symbol WS5000 Series System Reference Manual

8.24 Classification Group (CG) Context

A Classification Group (CG) is a collection of classifiers that evaluate network packets as they are sent to or
received from wireless devices (in Layer 2/layer 3 filters) and wired devices in firewall filters. The CG collects
classifiers and specifies what the classifier should do after it evaluates a packet.
It declares whether a packet that passes the classifier evaluation is accepted (allowed to proceed along the
network) or denied (thrown away). See the
involved in the packet filtering mechanism. Also, see
for more details.
Table 8.29 summarizes the commands within this context. Common commands between multiple contexts are
described in further detail in the
Table 8.29 Classification Group Context Command Summary
Command
.. or end Terminate a current session and moves up a context, hierarchically.
exit Terminate a current session and returns to the "root" prompt.
? or help Get the command information.
logout or bye Close this session.
clear Clear the screen.
emergencymode Enable or disable Emergency mode.

add

Creates and names a new Classification Group instance.
cg Changes the prompt to the context to a specified Classification Group
instance.
remove Removes a Classification Group instance.
show commands Display available classification groups.
8.24.1 add
Classification Group (CG) Context
Creates and names a new Classification Group instance, and changes the prompt to the instance's context.
Syntax
add <cg_name>
Parameters
cg_name The name to be given to the new Classification Group.
Example
WS5000.(Cfg).CG> add voip_in_cg
Adding Classification Groups...
Status: Success.
Network Policy (NP) Context
Classifier Context (CE)
Common Commands section.
Description
CLI Command Reference
for an overview of the objects that are
and
Policy Object (PO) Context
Ref.
page 8-7
page 8-7
page 8-7
page 8-8
page 8-8
page 8-8
page 8-163
page 8-164
page 8-164
page 8-165
8-163