Install - Symbol WS5000 Series System Reference Manual

Hide thumbs Also See for WS5000 Series:
Table of Contents

Advertisement

7. Status : 550 Failed to change directory.
8. clear
9. export
10. clear
11. export
12. export
13. clear
14. history

8.3.12 install

System Context
Configures the switch's failover role as Primary or Standby, and applies all settings specified in the command
file (.sym). Alternatively, this command is used to update Kerberos principals from a specified Kerberos file
(.krb), without reset.
Syntax
install <install_option> [filename]
Parameters
install_option
One of:
• primary – Configures the switch to act as Primary, and applies all settings specified
• standby – Configures the switch to act as Standby, and applies all settings as
• kerberos – Updates the Kerberos principals from the settings in the
• runcli – Configures the switch with the commands in the CLI commands
filename
Command (*.sym) or Kerberos (*.krb) file to use, which contains configuration settings.
The default .sym file is command.sym
Example
WS5000.(Cfg)> install primary cmd_template.sym
Begin command file processing...
Begin parsing command file for download and logging parameters...
Command file was parsed successfully.
Current Image Version is 2.1.0. FS patch will not be installed.
Begin processing image file...
Nothing to do. Skipping...
Begin processing config file...
Nothing to do. Skipping...
Validating IP parameters...
ERROR: Hostname or IP has not been provided!
Cannot set switch to Primary.
ERROR: IP parameter validation failed.
Rebooting the switch...
WS5000.(Cfg)> install standby cmd_template.sym
Begin command file processing...
Begin parsing command file for download and logging parameters...
Command file was parsed successfully.
Current Image Version is 2.1.0. FS patch will not be installed.
in the file <filename>. If the command file is not specified, install instead uses the
default "
command.sym
" file, if present. If "
install will not change anything.
described for the primary parameter value.
< filename> file (.krb), without reset.
CLI Command Reference
command.sym
" is also not present,
8-17

Advertisement

Table of Contents
loading

Table of Contents