Set Basicrates - Symbol WS5000 Series System Reference Manual

8-144
WS 5000 Series System Reference
Access Port Policy details
for "NY_APPolicy":
Example
WS5000.(Cfg).APPolicy.[NY_APPolicy]> set
Syntax: set <config_parameter>
config_parameter is a required parameter.
Valid commands:
set name
set np
set preamble
set rtsthreshold
set dtim
set beacon

set basicrates

set supportedrates
set nonspectrummgmt
set wmm
set wmeprofile
Incomplete command... use '?' for help.... exiting...
WS5000.(Cfg).APPolicy.[NY_APPolicy]>
8.20.7.1 set basicRates
Access Port Policy Instance
Sets the basic frequency rates for a given 802.11 radio type.
Syntax
set basicRates <radioType> <rates ...>
Parameters
radioType One of A, B, G, or FH (frequency hopping). Radio values are:
• A – Frequencies 6, 9, 12, 18, 24, 36, 48, 54
• B – Frequencies 1, 2, 5.5, 11
• G – Frequencies 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54
• FH – Frequencies 1, 2
rates A list of frequency values, in Mbps. The list of candidate frequencies depends on the
radio type. You can set multiple basic rates by passing a list of frequencies, e.g.: > set
B basicrates 1 2 11
Example
WS5000.(Cfg).APPolicy.[QIAPPolicy01]> set basicrates b 1,2,5.5,11
Configuring a Access Port Policy...
Status: Success.
Access Port Policy details for "QIAPPolicy01":
Policy Name
Description
Basic Rate for 11a
Supported Rate for 11a
Basic Rate for 11b
Supported Rate for 11b
Basic Rate for 11g
Supported Rate for 11g
: QIAPPolicy01
:
: 6,12,24
: 9,18,36,48,54
: 1,2,5.5,11
:
: 1,2,5.5,11
: 6,9,12,18,24,36,48,54