8.16 Access Port Instance
To drop into an Access Port instance, use the
Table 8.19
summarizes the commands within this context.Common commands between multiple contexts are
described in further detail in the
Table 8.19 Access Port Instance Context Command Summary
Command
.. or end
Terminate a current session and moves up a context, hierarchically.
exit
Terminate a current session and returns to the "root" prompt.
? or help
Get the command information.
logout or bye
Close this session.
clear
Clear the screen.
emergencymode
Enable or disable Emergency mode.
history
Display command history within a context or instance.
description
Create a description for thr Access Port instance.
name
Set the Access Port name.
reset
Resets the Access Port or its radio.
set
Configures settings for a particular Access Port.
show
Display context specific attributes
8.16.1 description
Access Port Instance
Create a description for the Access Port instance.
Syntax
description <description_text>
Parameters
description_text
Brief text to describe the Access Port instance.
Example
WS5000.(Cfg).APort.[ap_name]> description "This is a generic AP"
8.16.2 name
Access Port Instance
Set the Access Port name.
<
> command from within the
port
name
Common Commands
section.
Description
8-123
CLI Command Reference
context.
APort
Ref.
page 8-7
page 8-7
page 8-7
page 8-8
page 8-8
page 8-8
page 8-9
page 8-123
page 8-123
page 8-124
page 8-124
page 8-127