Radius Context; Set; Set Authentication - Symbol WS5000 Series System Reference Manual

8.43 Radius Context

The Radius context enables you to specify an external Radius server for authenticating network users (Web,
Telnet, and SSH) and local user through the serial port.
Table 8.48 summarizes the commands within this context. Common commands between multiple contexts are
described in further detail in the
Table 8.48 Radius Context Command Summary
Command
.. or end Terminate a current session and moves up a context, hierarchically.
exit Terminate a current session and returns to the "root" prompt.
? or help Get the command information.
logout or bye Close this session.
clear Clear the screen.
emergencymode Enable or disable Emergency mode.
configure the RADIUS Server

set

show Display context specific attributes
8.43.1 set

8.43.1.1 set authentication

Radius Context
Sets the type of connection for which logins must be authenticated by the Radius server.
Syntax
set authentication <connection>
Parameters
connection The type of connection. Possible values are:
• serial
• network
• localDB
Example
WS5000.(Cfg).RADIUS> set authentication serial enable
Configuring RADIUS server...
Status : Success.
RADIUS authentication status:
-----------------------------
Network users (Web, Telnet, etc.)
Local users (via serial port)
Authenticate locally if RADIUS server refuses access
Common Commands section.
Description
8-235
CLI Command Reference
Ref.
page 8-7
page 8-7
page 8-7
page 8-8
page 8-8
page 8-8
page 8-235
page 8-237
: Disable
: Enable
: Disable