About Instances - Symbol WS5000 Series System Reference Manual

WLAN details for the Access Port policy 'Default Access Port Policy'
WLAN Name
---------
Symbol Default
WS5000.(Cfg).APPolicy.[Default Access Port Policy]>

8.1.3 About Instances

Most contexts contain "instances" of themselves. An instance, is like a named context; it is a set of
configuration values that is identified by a name. Some contexts have pre-defined instances, but, in general,
instances must be created.
To create an instance, the
add
Switch Policy instance:
WS5000.(Cfg)> switchpol
Active Switch Policy name: Default Wireless Switch Policy
Available Switch Policies:
1. Default Wireless Switch Policy.
WS5000.(Cfg).SPolicy> add TestPolicy
Adding Switch Policy...
Status: Success.
Active Switch Policy name: Default Wireless Switch Policy
Available Switch Policies:
1. Default Wireless Switch Policy.
2. TestPolicy.
Switch Policy details
---------------------
Policy Name
Description
Country
Channel for .11a
Channel for .11b
Channel for .11g
Power Level for .11a
Power Level for .11b
Power Level for .11g
Active EtherPolicy Name
# of APPolicies attached
Include Adoption List details
Exclude Adoption List details
Default Adoption action for .11a : Deny.
Default Adoption action for .11b : Deny.
Default Adoption action for FH
Default Adoption action for .11g : Deny.
Send SNMP trap on adoption deny
DS Coexistence
WS5000.(Cfg).SPolicy.[TestPolicy]>
Network Policy
--------------
Default Network Policy
command is used with a <name> parameter. The following example creates a
: TestPolicy
:
: AU
: Auto (once)
: Auto (once)
: Auto (once)
: 20 dBm
: 20 dBm
: 20 dBm
: Default Ethernet Policy
: 0
: List is Empty.
: List is Empty.
: Deny.
: Disabled
: Disabled
8-5
CLI Command Reference