Set Nonspectrummgmt - Symbol WS5000 Series System Reference Manual

8-146
WS 5000 Series System Reference
Syntax
set dtim <dtim_period : 1 - 20>
set dtim <bss1 | bss2 | bss3 | bss4> <dtim_period : 1 - 20>
Parameters
dtim period Used to set the range of dtim interval
bss Placeholder for selecting one of the four bss. AP which has only one bss use the value
for bss1.
Example
WS5000.(Cfg).APPolicy.[DtimTest5]> set dTim bss3 8
Configuring a Access Port Policy...
Status: Success.
Access Port Policy details for "DtimTest5":
Policy Name
Description
Basic Rate for 11a
Supported Rate for 11a
Basic Rate for 11b
Supported Rate for 11b
Basic Rate for 11g
Supported Rate for 11g
Basic Rate for FH
Supported Rate for FH
RF Preamble
RTS Threshold
DTIM Period
DTIM Period BSS 2
DTIM Period BSS 3
DTIM Period BSS 4
Beacon Interval
Allow MUs w/o Spectrum Mgmt
WME Enabled
WME Profile Name

8.20.7.4 set nonSpectrumMgmt

Access Port Policy Instance
Tells the Access Port to allow (
management capabilities. This is only significant when the AP has DFS or TPC enabled.
Syntax
set nonSpectrumMgmt <flag>
Parameters
flag Indicates whether the AP will allow (true) or deny (false> association of mobile devices
that are not Spectrum-capable.
Example
WS5000.(Cfg).APPolicy.[NY_APPolicy]> set nonSpectrumMgmt true
: DtimTest5
:
: 6,12,24
: 9,18,36,48,54
: 1,2
: 5.5,11
: 1,2,5.5,11
: 6,9,12,18,24,36,48,54
: 1
: 2
: long
: 2347 Bytes
: 10
: 10
: 8
: 10
: 100
: false
: Disabled
: Default AP WME Profile
) or deny ( ) association for mobile devices that don't have spectrum
true false