System Context; Or Help - Symbol WS5000 Series System Reference Manual

8.3 System Context

Table 8.3 summarizes the commands within this context.
Table 8.3 System Context Command Summary
Command

? or help

Get the command information
logout or bye Close this session
clear Clear the screen
configure Change to the Configuration Context to configure system attributes
copy Copy files between the Switch and TFTP/FTP server
delete Delete an image/config file from the system
description Set description text
directory Display the available image/config files in the system
emergencymode Enable or disable Emergency mode
export Export log files from the switch to the TFTP server
history Display command history within a context or instance
install Install primary/standby or Kerberos config
logdir Display the user saved log files
name Set or change the name
ping Ping a network host/IP address
remove Remove a log file shown by 'logdir' command
restore Restore a system image or configuration
rfping Send a WNMP Ping to an Access Port
save Save the current system configuration to a file
service Switches to the Service mode
show commands Display system context specific attributes
8.3.1 ? or help
System Context
Retrieves a list of commands supported given the context or instance.
Syntax
?
or
help
CLI Command Reference
Description
8-11
Ref.
page 8-11
page 8-12
page 8-12
page 8-12
page 8-13
page 8-14
page 8-15
page 8-15
page 8-15
page 8-16
page 8-16
page 8-17
page 8-18
page 8-19
page 8-19
page 8-20
page 8-21
page 8-21
page 8-22
page 8-22
page 8-23