Restore; Rfping - Symbol WS5000 Series System Reference Manual

8.3.17 restore

System Context
Restores the specified system image and/or configuration, and then resets (reboots) the system with the newly
restored image and/or configuration.
Syntax
restore <restore_option> <filename>
Parameters
restore_option
The type of restore to be invoked. One of:
• system – Restores the system image and configuration from the specified file
• configuration – Restores the configuration from the specified file
• standby – Restores the standby configuration from the specified file
filename
The system image or configuration file to be restored
Example
WS5000>restore config siteconfig.cfg
This command will reset the system and boot up with the new configuration.
Do you want to continue (yes/no)
Restoring configuration from siteconfig.cfg
Restoring Wireless Network Management Configuration ...
This may take a few mins ...
Restoring configuration from siteconfig.cfg
Software Ver.
Starting the Wireless Switch 5000 ...
Licensed to
Configuring ethernet ports ...
Done.
Done.
No TFTP server is present.
Max Mobile Clients
Exiting auto install script...
Active Switch
Starting system database ...Wireless Switch Policy
Done.
Starting switch processes ...

8.3.18 rfping

System Context
This performs a ping to the specified access port, using WNMP, for a specified number of times.
Note This CLI is supported only for AP200 and AP300.
Syntax
rfping <mac address> [<count>]
Parameters
mac address The device MAC address of the Acess Port
: y
: 1.4.1.0-003D
: Symbol
8-21
CLI Command Reference