Show - Symbol WS5000 Series System Reference Manual

attribute and value
dsCoexistence <enable_flag>
description <description_text>
etherPolicy <etherpolicy_name>
name <SwitchPolicyName>
power <power_setting> <radio_type>

8.56.7 show

Switch Policy Instance
Display details about the switch policy instance, or other entities if specified in the command.
Syntax
show
show accessports
show acl
show appolicy
show channelinfo
show ethernet
show etherpolicy
show interfaces
show restrictedchannels Display the restricted channels
show securitypolicy
show switchpolicy
show system
Parameters
None.
Example
WS5000.(Cfg).SPolicy.[Default Wireless Switch Policy]> show
Active Switch Policy details
----------------------------
Policy Name
Description
Country
Channel for .11a
Channel for .11b
Channel for .11g
Power Level for .11a
Power Level for .11b
Power Level for .11g
Active EtherPolicy Name
Frequence hopping/direct sequence (FH/DS) coexistence. With coexistence
enabled, the access port divides the frequency spectrum such that FH devices
use one portion, and DS devices use the other. Possible values are: enable or
disable.
Note: FH/DS co-existence isn't legal in all countries.
The dsCoexistence attribute is always turned off in
these countries.
Brief descriptive text to identify the switch policy.
Sets the switch policy's active ethernet policy
Sets the switch policy's name.
Sets the power, in milliWatts, for the specified 802.11x radio type. Valid
power settings are in the range 4 through 20.
Valid radio types are a, b, g, for 802.11a, 802.11b, or 802.11g respectively.
Display context specific attributes
Display access port details
Display ACL information
Display Access Port Policy
Display channel no and country code details
Display Ethernet Port details
Display EtherPolicy details
Display interface details
Display security policy details
Display Switch Policy
Display system information
: Default Wireless Switch Policy
: Switch Policy with Default Settings
: None
: Auto (once)
: Auto (once)
: Auto (once)
: 20 dBm
: 20 dBm
: 20 dBm
: Default Ethernet Policy
CLI Command Reference
Description
8-287