Symbol WS5000 Series System Reference Manual page 222

6-70
WS5000 Series Switch System Reference Guide
Figure 6.91 Creating a Wireless Switch Policy—Disallowed Adoption Lists
9. If desired, create an Access Port List that includes "disallowed" MAC address ranges. Only those APs
that fall within the specified address range(s) are disallowed to be adopted.
If you do not specify an allowed AP list, all APs are candidates for adoption.
10. When done, click Next. A panel to assign an action to be taken when the Wireless Switch detects an
"unknown" AP—or, in other words, an AP that is not in an "allowed" list or "disallowed" list—is
displayed.
Figure 6.92 Creating a Wireless Switch Policy—Assigning an Action for Unknown APs
11. Set the action within this panel.
• To deny adoption, select Deny Adoption. By checking the Send SNMP Trap box, an SNMP trap
is captured when such an AP is denied.
• To allow adoption, select Adopt, and select the Access Port Policy applied to the adopted AP, for