List Of Traps And Syslog Messages - Symbol WS5000 Series System Reference Manual

The WS5000 switch supports raising of SNMP Traps and/or logging of Syslog messages, on certain events.
The list of events are listed in the table below.
The user can configure, for each event, if a SNMP Trap is to be sent, a syslog message is to be logged or both

16.1 List of Traps and Syslog Messages.

Table 16.1 Default Syslog and Traps Configuration
S.No
1 License number change
Whenever the number of access port licences that is supported by the
switch, has changed.
Syslog and Traps
Event Default Default Default
Local Log Syslog
SNMP
Severity
Trap
Enabled Disabled Disabled