Show Commands - Symbol WS5000 Series System Reference Manual

8.4 show commands

System Context
Configuration (Cfg) Context
Show the settings for the specified system component. There are a number of ways to invoke the show
command:
• Invoked without any arguments, show displays information about the current context. If the current
context contains instances, then show command (usually) displays a list of these instances.
In the case of the System/Configuration context, show displays all the possible show command
variations. Use show system command to show system information.
• Invoked with the display_parameter, it displays information about that component.
Syntax
show [ display_parameter ]
Example
WS5000.(Cfg)> show wlan
WS5000 > show system
Parameters
Table 8.4 lists and describes the display_parameters in the show command.
Table 8.4 show command's display_parameter Summary
Display_parameter
show aaa-server Displays AAA information
show accessports Displays details of all access ports or available
access ports
show acl Display ACL Information
show allconfig Displays all configurations on the switch
show appolicy Displays Access Port Policy
show arp Display arp cache
show autoinstalllog Displays autoinstall log
show ce Displays Classifiers
show cfghistory Displays configuration change history
show cg Displays Classification Group
show channelinfo Displays channel no and country code details
show chassis Displays Chassis details
show configaccess Displays configured system access restrictions
show ethernet Displays Ethernet Port details
show etherpolicy Displays EtherPolicy details
Description
8-23
CLI Command Reference
Context Example
system / cfg page 8-25
system / cfg page 8-25
system / cfg page 8-26
system page 8-26
system / cfg page 8-26
cfg page 8-26
system / cfg page 8-26
system / cfg page 8-27
system / cfg page 8-27
system / cfg page 8-28
system / cfg page 8-28
system / cfg page 8-31
system / cfg page 8-32
system / cfg page 8-32
system / cfg page 8-32