Set - Symbol WS5000 Series System Reference Manual

Configuring IP address of Ethernet 1...
Status: Success.
Name
Network Interface Card #
Description
MAC Address
Status
Online
Configured Mode
Negotiated Mode - Duplex
Negotiated Mode - Speed
DHCP status
IP Address
Network Mask
Domain Name
Port type (trunk/non-trunk)
VLAN Tags seen
Up-Time
Transmit packets
Received packets
Gateway
DNS servers
1. 111.222.111.100.
WS5000.(Cfg).Ethernet.[1]>
WS5000.(Cfg).Ethernet.[1]> ipaddress dhcp enable
Configuring IP address of Ethernet 1...
Status: Failed.
ERROR: Cannot set parameter. DHCP can only be enabled on single interface at a
time.
WS5000.(Cfg).Ethernet.[1]>

8.28.2 set

Ethernet Port Instance
Sets an attribute of this Ethernet port instance.
Syntax
set <attribute> [<value>]
Parameters
attribute
cfgMode Sets the Ethernet port mode. Possible values are:
• Auto
• 10_Half
• 10_Ful
• 100_Half
• 100_Full
dhcp Enables/disables the DHCP client for this port. Possible values are:
• enable
• disable
gateway Sets the IP address of the gateway. Enter the IP address as a value.
: Ethernet 1
: 1
: Ethernet Adapter
: 00:A0:F8:65:94:B8
: Enable
: Yes
: auto
: Full
: 100
: Disable
: 10.1.1.101
: 255.255.255.0
: domain1
: Non-Trunk
: None
: 12d:03h:58m
: 4261430
: 4960275
: 111.222.111.254
:
Description
8-175
CLI Command Reference