Set Bss; Set Bw - Symbol WS5000 Series System Reference Manual

8-152
WS 5000 Series System Reference

8.21.2 set bss

Access Port Map Context
Assigns a BSS index ID to a WLAN. The WLAN must already be part of the Access Port Policy that owns this
Map.
Note This command applies only to: 4BSS-to-16ESS (AP200b, AP300, AP4121)
Syntax
set bss <bss_index> <wlan_name>
Parameters
bssid The BSS index ID that is being assigned to the WLAN. Possible values are:
1 - 4.
wlan_name The name of the WLAN to take on the BSS index assignment.
Example
WS5000.(Cfg).APPolicy.[NY_APpolicy].Map.[4BSS-16ESS]> set bss 1 WLAN_NE
Configuring a Access Port Policy...
Status: Success.
4BSS-16BSS mapping (used for AP200 11b radio, AP300 and AP4121):
WLAN Name
---------
WLAN_NE
Total BandWidth:
WS5000.(Cfg).APPolicy.[NY_APpolicy].Map.[4BSS-16ESS]>

8.21.3 set bw

Access Port Map Context
Sets the guaranteed bandwidth that's assigned to a WLAN. The total bandwidth for all WLANs within a Map
must equal 100. This command applies only to: 1BSS-to-16ESS (AP200a), 4BSS-to-16ESS (AP200b, AP300,
AP4121)
Syntax
set bw <bandwidth> <wlan_name>
Parameters
bandwidth The percentage of bandwidth assigned to the WLAN. Valid percentages are in the range
from 5 to 100.
wlan_name The name of the WLAN.
Example
WS5000.(Cfg).APPolicy.[NY_APpolicy].Map.[4BSS-16ESS]> set bw 20 WLAN_NE
Configuring a Access Port Policy...
BSS Primary
--- -------
1 *
BW(%)
-----
5.00%
5.00%