12-14
WS5000 Series Switch System Reference
12.3 VPN Session Setup
Figure 12.2 VPN Network Setup
12.3.1 Switch Setup
Table 12.7
lists and describes the CLI commands used to configure the various switch parameters.
Table 12.7 Switch Setup
To
set VPN support status
set up a new WLAN
setup Access Port Policy
Use
set vpnsupport enable <license file> [CR]
set vpnsupport disable [CR]
WS5000.(Cfg)> set vpnsupport enable
This command will reset the system.
Are you sure (yes/no) : yes
WS5000.(Cfg)>wlan add SampleWlan SampleEssid
Where SampleEssid is the ESSID
WS5000.(Cfg)>appolicy
WS5000.(Cfg).APPolicy> add SampleAPPolicy
WS5000.(Cfg).APPolicy.[SampleAPPolicy]> add SampleWlan