Set Ardelay; Set Heartbeat; Set Mac - Symbol WS5000 Series System Reference Manual

8.54.4 set arDelay

Standby Context
Enables or disables the (sending of the) heartbeat on a particular NIC by setting an auto-revert delay, in
minutes.
Note You must call
Syntax
set arDelay <delay>
Parameters
delay The delay time, in minutes. An integer in the range [0, 9999].
Example
WS5000.(Cfg).StandBy> set ardelay 10

8.54.5 set heartbeat

Standby Context
Sets the heartbeat for the Standby switch.
Syntax
set heartbeat <enable_flag> <NIC>
Parameters
enable_flag Valid values are enable, to enable the heartbeat, or disable—to disable the heartbeat.
NIC The NIC through which the heartbeat is sent.
Example
WS5000.(Cfg).standby> set heartbeat enable

8.54.6 set mac

Standby Context
Sets the Ethernet port on the other WS5000 to which this WS5000 sends its heartbeat (per NIC). You can set
the port by its MAC address, or you can ask the switch to discover the port automatically.
Note You must call
Syntax
set mac <port> <NIC>
disable before calling this command.
disable before calling this command.
8-275
CLI Command Reference