Emergencymode; Encrypt; Ethernet - Symbol WS5000 Series System Reference Manual

8-56
WS 5000 Series System Reference

8.5.19 emergencymode

Configuration (Cfg) Context
Enables or disables the "Emergency" Switch Policy (ESP), a switch policy that can activated (enabled) at any
time in case of an emergency. When ESP is deactivated (disabled), the previous switch policy is reactivated.
To set the emergency policy, use the emergencymode command.
Syntax
emergencyMode <enable/disable>
Parameters
enable / disable Indicates whether to enable or disable the ESP.
Example
WS5000.(cfg)> emergencymode enable

8.5.20 encrypt

Configuration (Cfg) Context
Use this command to get the encrypted password.This command encrypts CLI user passwords, kerberos user
passwords, service mode password, vpn simple auth password, radius secret, WEP keys.This encrypted
password is used in autoinstall command file.
Syntax
encrypt <password>
Parameters
password The password to be encrypted.
Example
WS5000.(Cfg)> encrypt <symbol>
Encrypting password '<symbol>'....
Actual Password <symbol>
Encrypted Password 4527w5630f51f
WS5000.(Cfg)>

8.5.21 ethernet

Configuration (Cfg) Context
Display the currently available ethernet ports for the switch. Also, the context is changed to the
Context. See page 8-172 for more details.
Syntax
ethernet
Parameters
None.
Ethernet Port