Symbol WS5000 Series System Reference Manual page 309

Mu Threshold details :
Status
Min Packets for RF Traps
Packets Per Second
Throughput in Mbps
Average Bit Speed in Mbps
Percent of NUCast Packets
Average Signal in Dbm
Average Retries
Percent of Dropped Packets
Percent of Undecryp Packets
Note The threshold value for all the threshold names, except for average signal, can
be between zero and (no maximum limit).
Note The value for Average signal, measured in Dbm, must always be below zero
(negative value).
set logout
Configuration (Cfg) Context
Sets the CLI's auto-logout time, in minutes.
Syntax
set logout <#minutes>
Parameters
#minutes CLI's auto-logout time, in minutes. Valid values are 0 through 1440 (24 hours). Use 0 to
disable auto-logout.
Example
WS5000.(Cfg)> set logout 10
Setting auto-logout time (10 min) for CLI.... done.
WS5000.(Cfg)> set logout 0
Disabling auto log-off.... done.
WS5000.(Cfg)>
set snmptrap
Configuration (Cfg) Context
Enables or disables SNMP traps, globally.
Syntax
set snmptrap <snmptrap_flag>
: disabled
: Not Set
: 100
: Not Set
: Not Set
: Not Set
: Not Set
: Not Set
: Not Set
: Not Set
8-77
CLI Command Reference