Symbol WS5000 Series System Reference Manual page 704

15-8
WS5000 Series Switch System Reference Guide
Figure 15.5 Sensor tab displaying the available sensor(s)
2. Select an sensor by clicking on the checkbox associated with the sensor that you want to convert to an
AP300. Click on the Modify button to view the current/default configuration of the sensor. This opens
the WIPS Configuration window.
Disable the DHCP, by clicking on the checkbox, to modify the values of Sensor IP and Subnet Mask . If
the DHCP server is enabled then these values (Sensor IP and Subnet Mask ) is provided by DHCP and
you cannot modify it. Click the Save button to commit the changes made, if any.
Figure 15.6 The default WIPS Configuration window displaying the default sensor configuration