Symbol WS5000 Series System Reference Manual page 60

2-8
WS5000 Series Switch System Reference Guide
Please continue with upgrade after this, as freeing might
make the current system unusable .. !!
Do you want to free some space (y/n):
If the script does not find the required space, it displays:
Do you want to free some space (y/n): y
Trying to find out how much space can be freed .. !!
/image/*.img: File or directory doesn't exist
/image/*.txt: File or directory doesn't exist
/WS5x00Switch/CC/*txt*: File or directory doesn't exist
Image Space 0
Txt Space 0
PG Space 3
Apache Space 7
SNMP Space 2
Log Space 0
Total Space that can be freed : 12
Saving the Configuration before Freeing the space .. !!
Saving wireless network management configuration...
Configuration saved successfully.
Found the space to be freed .. Freeing .. !!
SM-WS5000>
Scenario 2
At times you may also need to update the DOM firmware when the switch fails to run the preupgrade script.
In such a case the script displays:
Note If you do not wish to upgrade the firmware, then you can use the following
CLI command:
launch -c /image/PreUpgradeScript freemem nofwcheck
SM-WS5000> launch -c /image/PreUpgradeScript freemem
Verifying dominfo Checksum
dominfo Checksum Verification Passed
checking type of DOM
Showing details of DOM
Model Number______________________: Kouwell DOM
Serial Number_____________________: HyFlash
Controller Revision Number________: 01/10/09
Able to do Double Word Transfer___: No
Controller buffer size (bytes)____: 512
Transfer Speed____________________: > 10 Mbit/sec
Drive Type________________________: Removable
IORDY Supported___________________: No
Can IORDY be disabled by device___: No
LBA Mode supported________________: Yes
00002798