Set - Symbol WS5000 Series System Reference Manual

Supported Rate for 11a
Basic Rate for 11b
Supported Rate for 11b
Basic Rate for 11g
Supported Rate for 11g
Basic Rate for FH
Supported Rate for FH
RF Preamble
RTS Threshold
DTIM Period
DTIM Period BSS 2
DTIM Period BSS 3
DTIM Period BSS 4
Beacon Interval
Allow MUs w/o Spectrum Mgmt
WME Enaled
WME Profile Name
WLAN details for the Access Port policy 'NY_APpolicy'
WLAN Name
---------
WLAN_NE
WS5000.(Cfg).APPolicy.[NY_APpolicy]>

8.20.7 set

Access Port Policy Instance
Used to configure the Access Port Policy instance related parameters.
Syntax
set <config_parameter>
Parameters
set <config_parameter> Description
Assigns the Network Policy that's associated with the combination of this
set np
Access Port Policy and WLAN.
Sets the length of the preamble (either
set preamble
packets that are sent by Access Ports that adopt this policy
Sets the Request to Send (RTS) threshold.
set rtsThreshold
Sets the Access Port's DTIM interval as a multiple of the beacon interval. Valid
set dTim
DTIM values are in the range [1, 20].
Sets the Access Port's radio beacon interval, in milliseconds. Valid intervals are
set beacon
in the range [20, 1000].
Sets the basic frequency rates for a given 802.11 radio type
set basicRates
Sets the radio frequencies that are supported by the device.
set supportedRates
Tells the Access Port to allow (
set nonSpectrumMgmt
devices that don't have spectrum management capabilities.
Sets the wmn for the switch
set wmm
: 9,18,36,48,54
: 1,2
: 5.5,11
: 1,2,5.5,11
: 6,9,12,18,24,36,48,54
: 1
: 2
: short
: 2347 Bytes
: 10
: 10
: 10
: 10
: 100
: false
: Disabled
: Default AP WME Profile
Network Policy
--------------
) or deny (
true
CLI Command Reference
or ) that's added to the
short long
) association for mobile
false
8-143