8.2.5 clear
Common to all contexts and instances
Clear the screen of all running command input and output entries.
Syntax
clear
Parameters
None.
Example
WS5000> clear
8.2.6 emergencymode
Common to all contexts and instances
Enables or disables the "Emergency" Switch Policy (ESP), a switch policy that can activated (enabled) at any
time in case of an emergency. When ESP is deactivated (disabled), the previous switch policy is reactivated.
To set the emergency policy, use the
Syntax
> emergencyMode <enable_flag>
Parameters
enable_flag
Indicates whether to enable or disable the ESP. Possible values are:
• enable
• disable
Example
WS5000.<context_path> > emergencyMode enable
8.2.7 history
Common to all contexts and instances
Display the history of commands invoked at the command prompt for any given context. Alternatively, using
the keyboard "up arrow" key is a short-cut to retrieve (and reuse) commands that were used previously in a
context session.
Syntax
history
Parameters
None.
Example
WS5000.<context_path> > history
set zone
command.
8-7
CLI Command Reference