Aaa User Database Context; Group - Symbol WS5000 Series System Reference Manual

8.12 AAA User Database Context

Table 8.15 shows the AAA user database context commands.
Table 8.15 AAA User Database Context Commands
Commands Description
.. or end Go back to the previous context.
exit Go back to root context.
? or help To get the command information
logout or bye Close this session
clear Clears the screen
emergencymode Enable or disable Emergency Mode

group

Configure Groups.
user Configure Users.
8.12.1 group
AAA User Database - Group Context
This is a sub-context of userdb context. Use group to configure Group parameters.You can add and remove
Groups, using the group command.
Use AAA.userdb.Group context to
• add a new group to the system
• add a user to group
• remove a RADIUS group from the system
• remove a user from group
Syntax
group [CR]
Parameters
None
Example
WS5000.(Cfg).AAA.userdb.Group> add newGroup1
Adding RADIUS Group...
Warning: Please commit these changes using Save command in AAA context.
Status: Success.
Group information
Available Groups:
1. newGroup1.
Group information
Available Policies for this group:
8-109
CLI Command Reference