Tunnel - Symbol WS5000 Series System Reference Manual

8.30.7 tunnel

Use this to configure a tunnel.
Syntax
tunnel <tunnel_name>
Parameters
tunnel_name
Place holders for one of the existing GRE tunnels that you want to configure.
Example
WS5000.(Cfg).EtherPolicy.[tunnelEP]> tunnel tunnel3
Tunnel Interface
------- ---------
tunnel3 Ethernet 2
WS5000.(Cfg).EtherPolicy.[tunnelEP].Tunnel.[tunnel3]>
8.30.8 vlan
Ethernet Policy Instance
Changes the prompt to the context of the VLAN identified by VLAN ID.
Syntax
vlan <vlan_ID>
Parameters
vlan_ID The ID of the VLAN. For a list of VLAN IDs, invoke show vlan.
Example
WS5000.(Cfg).EtherPolicy.[LabEtherPolicy]> vlan 200
Adding VLAN...
Status : Success.
Ether Policy Name
Description
Rest of Network on
VLANs mapped are:
LAN2
VLAN 200
ID Interface
-- ---------
VLAN 200 Ethernet 1
WS5000.(Cfg).EtherPolicy.[LabEtherPolicy].Vlan.[200]>
Priority # of WLANs
-------- ----------
0 0
: LabEtherPolicy
:
: Ethernet 2
--> Ethernet: 2
--> Ethernet: 1
Priority # of WLANs
-------- ----------
0 0
CLI Command Reference
Ethernet Policy
---------------
tunnelEP
Ethernet Policy
---------------
LabEtherPolicy
8-185