Symbol WS5000 Series System Reference Manual page 711

Hide thumbs Also See for WS5000 Series:

System reference manual (426 pages)

Reference manual (314 pages)

Troubleshooting manual (56 pages)

Table of Contents

Table 16.1 Default Syslog and Traps Configuration

Standby active

Whenever standby is taken over from primary.

Primary internal failure [reset]

Whenever primary interface is stopped.

Standby internal failure [reset]

Whenever standby interface is stopped.

Standby auto-revert

Whenever the standby, which is currently active enters the non-active state

because primary switch has come up.

Primary auto-revert

Whenever the primary, which is currently active enters the non-active state

because standby switch has come up.

Auto channel select success/error

Whenever the switch has successfully/unsuccessfully performed the ACS for

an Access Port.

Emergency Policy [active]

Whenever the emergency switch policy is activated.

Emergency Policy [deactivated]

Whenever the emergency switch policy is de activated.

Low flash space on switch

Whenever the freespace on the flash drive (DOM) has gone below a user

configurable threshold.

Miscellaneous debug events

For various miscellaneous events:

license key on a WS-Lite cannot be upgraded.

Invalid License key for WS-Lite

Watchdog timer could not be updated

Ethernet port configuration issues.

DFS radio channelscan results overdue.

No valid country for 2.11 radio

End of WPA counter measures.

HSB Starts Up

Whenever the HSB feature is enabled.

HSB Peer Connect

Whenever the primary/standby switch gets connected.

CPU/SYS Temp Notification

Whenever the CPUs/ systems temp exceeds the user specified threshold.

Access Changed Notification

Whenever the access mechanism to the system (telnet,ssh) are changed

Syslog and Traps

Symbol WS5000 Series System Reference Manual page 711

Related Manuals for Symbol WS5000 Series

Related Products for Symbol WS5000 Series

Table of Contents