Symbol WS5000 Series System Reference Manual page 358

8-126
WS 5000 Series System Reference
Table 8.20 Access Port Instance "Set" Command Summary (Continued)
Set Command
statistics Enable/disable Access Port information
gathering. When enabled, the Access Port
reports throughput in packets-per-second, as
well as the amount of time that it has been
adopted by the switch. Use the
with no argument to display.
dwellTime Frequency-hopping maximum dwell time.
hopSeq Frequency-hopping hop sequence.
maxChannels is the maximum number of
channels (allowed by the country setting)
divided by three.
hopSet Frequency-hopping hop set.
antCorrection The power correction (increase) due to the AP's
(isotropic) antenna; in dB (dBi).
indoor Indicates whether the AP is being used indoors
(true) or outdoors (false).
simulateRadar Tells the Access Port to pretend that radar has
been discovered.
user-802.1x Declares a username for the AP, for information
only.
detectorap Scans for rougue APs in all the channels
onchannelscan Scans for rougue APs in its operating channel.
Syntax
set <attribute> <value>
Parameters
See the applicable set command in
Example
When access port device attributes are set, all access port settings for the access port instance are displayed,
with the change in place. For example, in the following, the CCA Threshold value was changed from 0 to 10.
See the Syntax examples in Table 8.20
WS5000.(Cfg).APort.[00:A0:F8:A2:91:7C [B]]> set ccathreshold 10
Description
show command
Table 8.20 for more details, as applicable.
for details on each set command.
AP Models Syntax
All set statistics <enable_flag>
AP 3020 set dwellTime <maxdwelltime>
AP 3021
AP 100
AP 3020 set hopseq <maxchannels>
AP 3021
AP 100
AP 3020 set hopSet <value>
AP 3021
AP 100
AP 300 set antCorrection <value>
AP 300 set indoors <true_or_false>
AP 300 set simmulateRadar
AP 300 set user-802.1x <username>
AP 3020 set detectorap
AP 3021
AP 100
AP 3020 set onchannelscan
AP 3021
AP 100