Addnat - Symbol WS5000 Series System Reference Manual

2. LAN2
3. LAN_VPN
4. testLAN
LAN information:
LAN details...
Name
Description
ep
np
allow
deny
NAT list:
WS5000.(Cfg).Fw.[testLAN]>

8.34.2 addnat

FW (Firewall) Context
This command is used to add a NAT (Network Address Translation) entry to a specific LAN/LAN+ VLAN
combination.
Syntax
addnat <"remoteRealIp,localNatIp"> <lan_name> [vlanid]
Parameters
remoteRealIp This is the real IP address of the remote end
localNatIp This is the IP address of the remote device as seen by the device accross the WS5000
switch.
lan_name
The LAN in which this NAT entry should be added to. Could be one of LAN 1 or LAN 2 or
LAN_VPN.
vlanid An optional VLAN ID.
Example
WS5000.(Cfg).Fw> addnat "1.2.3.4,10.2.3.4" LAN1
Addng a NAT entry to a LAN...
Status: Success.
LAN information:
Available LANs:
1. LAN1
2. LAN2
3. LAN_VPN
WS5000.(Cfg).Fw> 1
LAN information:
LAN details...
Name
Description
ep
np
: testLAN
:
:
:
: https http telnet ftp
:
: LAN1
: Public LAN
: 1
:
8-201
CLI Command Reference