Set - Symbol WS5000 Series System Reference Manual

Parameters
None
Example
WS5000.(Cfg).rogueap.rulelist> add 11:22:22:22:22:22 test
Adding AuthAP...
Status: Success.
Authorise Symbol AP : disable
Index
-----
0
WS5000.(Cfg).rogueap.rulelist>

8.44.5 set

Rogueap Context
Use set to set or reset any or all of the detection mechanism.
Note Detectorscan requires detector APs to be configured on the system. Use
detectorap context to do the same.
Syntax
set <feature_name> <enable/disable> [<interval>]
Parameters
feature_name
It can be either the rogueap OR muscan/apscan/detectorscan.
interval
Integer value between 5 and 65535. Applicable only when muscan/apscan/
detectorscan is enabled.
Example
WS5000.(Cfg).rogueap> set rogueap enable
Configuring RogueAP...
Status: Success.
RogueAP configuration details:
------------------------------
RogueAP Status
MU Scan Status
AP Scan Status
Detector Scan Status
MU Scan Interval(min.)
AP Scan Interval(min.)
Detector Scan Interval(min.)
WS5000.(Cfg).rogueap>
or
WS5000.(Cfg).rogueap> set apscan enable 8
MAC
----
11:22:22:22:22:22
: enable
: disable
: disable
: disable
: 0
: 0
: 0
CLI Command Reference
ESSID
-----
test
8-241