Symbol WS5000 Series System Reference Manual page 632

12-8
WS5000 Series Switch System Reference
Table 12.3 IP Pool Configuration
To
get the index number
enable/disable use of DHCP
Gateway
set ip pool netmask
set IP Pool DHCP Server IP
address
set IP Pool default gateway
set IP Pool DNS Address
set IP Pool WINS Address
set IP Pool domain name
set IP Pool NETBIOS Node Type
set IP Pool domain name
set IP Pool DHCP Lease Time
add a range to an existing pool
remove a range from an existing
pool
set IP Pool Reuse timer
CLI command used
WS5000.(Cfg).wvpn.pool >show pool <pool name>
Output of this command (Index is in bold)
Number of ranges
IP Ranges:
0) 111.111.111.150-111.111.111.160
WS5000.(Cfg).wvpn.pool >enable/disable
WS5000.(Cfg).wvpn.pool[pool name] >set netmask
<netmask>
WS5000.(Cfg).wvpn.pool[pool name]
<ip address>
WS5000.(Cfg).wvpn.pool[pool name]
<defaultGateway <ip address>
WS5000.(Cfg).wvpn.pool[pool name]
<ip address>
WS5000.(Cfg).wvpn.pool[pool name]
<ip address>
WS5000.(Cfg).wvpn.pool[pool name]
<domain name>
WS5000.(Cfg).wvpn.pool[pool name]
<node type>
Node type can be: H-node, B-node, P-node, & M-node. H-node is the
default
WS5000.(Cfg).wvpn.pool[pool name]
<domain name>
WS5000.(Cfg).wvpn.pool[pool name] >set dhcpLeaseTime
< duration in seconds>
WS5000.(Cfg).wvpn.pool[pool name]
<begin IP> <end IP>
WS5000.(Cfg).wvpn.pool[pool name]
<begin IP> <end IP>
OR
WS5000.(Cfg).wvpn.pool[pool name] >remove rangeIndex
<index number>
WS5000.(Cfg).wvpn.pool[pool name]
duration in seconds>
This IP address reuse time is used only when all pool ranges are exhausted.
Once pool is depleted and a new request is made for an address, the current
list of active IP addresses are checked to see how long they are idle. Those
IP addresses that are greater than this reuse time are reallocated and
handed out to the new client.
: 1
>set dhcpServer
>set
>set dns
>set wins
>set domain
>set nodeType
>set domain
>add range
>remove range
>set reuseTime <