Copy - Symbol WS5000 Series System Reference Manual

9-8
WS5000 Series Switch System Reference
snmp
ssh
ssl
standby
switchpolicy
telnet
tunnel
user
watchdogtimer
wlan
wvpn
wvpnctl
SM-WS5000.(Cfg)>

9.2.8 copy

Copies a file (system image (*.img) or configuration file (*.cfg) from the WS5000 to a (T)FTP server, or vice
versa. TFTP can be used to transfer
. , , and files.
sys.img .cfg .sym
The following are the default modes:
• Default protocol is TFTP
• Default user for FTP: anonymous
• Default mode for FTP: binary.
If using FTP, and the user is not anonymous (using -u option), CLI prompts the user to enter password.
IMPORTANT! DO NOT USE THIS COMMAND FOR FILES LARGER THAN 32MB.
Syntax
copy <source> <destination> [-u user] [-m mode]
Parameters
The source of the file. Possible values are:
source
• [protocol:]//<host_name or IP>/[file_name].For example,
• tftp
• ftp
• system
• .
• [/]<file_name>
Configure SNMP parameters.
Configure SSH settings.
Configure SSL settings.
Configure system Standby settings.
Configure Switch Policy.
Configure system Telnet settings.
Configure tunnel information.
Configure user information.
Enable/disable watch dog timer
Configure WLAN for the system.
Configure system WVPN settings.
Enable/disable wvpn logging
, , and
*.sys.img *.cfg
ftp://<ipAddress/path/[file_name]. If a filename is not supplied, the system
will prompt for one, in addition to a password.
files. FTP can be used to transfer
*.sym
,
.krb