Symbol WS5000 Series System Reference Manual page 357

Table 8.20 Access Port Instance "Set" Command Summary (Continued)
Set Command
channel Access Port transmit channel. Possible values
are:
• <channel#> – Specific channel number
• auto-once – The AP uses Automatic Channel
Selection (ACS) the first time it's adopted by
the switch, and then sticks to that channel
thereafter.
• auto-always – The AP uses ACS every time
it's adopted.
• random – The AP chooses a random channel
every time it's adopted.
power Access Port transmission power. Possible
values are 4-20 dBm
muPower The amount in which associated mobile units
are told to adjust (increase) their power.
Although this is a drain on MU batteries, it can
help improve signal fidelity. The possible
adjustment values are in positive, integral dB.
location Access Port location description.
ccaMode Sets the Access Port's CCA mode. Possible
values are:
• 0 –
• 1 – Energy above threshold
• 2 – Carrier sense only
• 3 – Carrier sense with energy above
threshold
ccaThreshold Sets the Clear Channel Assessment threshold,
which is the maximum level of traffic that the
AP will accept and still consider the channel to
be clear. 0 means no traffic; 31 means jam-
packed.
diversity Access port diversity antenna setting. Possible
values are:
• full – The AP dynamically chooses the
antenna with the strongest signal.
• primary – Use this AP as a Primary antenna.
• secondary – Use this AP as a Secondary
antenna.
vLanId VLAN ID that the Access Port is to be part of.
clearVLanTags Clears the VLAN tag register.
Description
CLI Command Reference
AP Models Syntax
All except: set channel <value>
• AP 3020
• AP 3021
All except: set power <power_value>
• AP 3020
• AP 3021
All except: set muPower <mupwr_value>
• AP 3020
• AP 3021
All set location <location_text>
All set ccaMode <CCA_mode#>
All set ccaThreshold <value>
All set diversity <setting>
All set vLanId <vLAN_ID>
All set clearVLanTags
8-125