Downgrading From 2.1 To 2.0 - Symbol WS5000 Series System Reference Manual

If any of the below two messages are displayed then press the escape key (ESC) to return to the boot selection
screen
Minimal BASH-like line editing is supported.
TABlists possible command completions.
the possiblecompletions of a device/filename.
exits.
grub>
or
kernel (hd0,0)/boot/vmlinuz-2.4.20_mvl31
console=ttyS0,19200 quiet
initrd (hd0,0)/boot/ramdisk.img

2.4 Downgrading from 2.1 to 2.0

1. To downgrade the WS5000 switch from version 2.1 to 2.0 you need to download –
Downgrade2.0.0.0-034R.sys.img. Follow the steps mentioned below to download the
image:
WS5000.(Cfg)> copy ftp system -u ftpuser -m bin
Enter the file name to be copied from FTP server : /home/
WS5x00Switch/builds/bf-2.1.0.0/R_BF_2.1.0.0-xxxR/downgrade/
Downgrade2.0.0.0-034R.sys.img
IP address of the FTP server : 111.111.111.111
Enter the user password : *******
Copying 'Downgrade2.0.0.0-034R.sys.img' from ftp://
111.111.111.111 to Switch...
Data connection mode : BINARY (Connecting as 'ftpuser')
Status : Transfer completed successfully
15872271 bytes received in 1.9 seconds (8364374 bytes/s)
Verifying imagefile...
Valid imagefile. Completing verification.
2. Run the following command:
WS5000.(Cfg)> restore system Downgrade2.0.0.0-034R.sys.img
This command will reset the system and boot up with the new
restored image.
Do you want to continue (yes/no)
Restoring system image and configuration from Downgrade2.0.0.0-
034R.sys.img
It might take a few minutes.......
Installing the System Image
For the first word,
Anywhere else TAB lists
ESC at any time
: yes
2-13