Set - Symbol WS5000 Series System Reference Manual

8.46.1 set

Security Policy Instance
Sets an attribute of the Security policy instance. The tables, below, divide the settings into topical groups.
Syntax
set <attribute> <value(s)>
Parameters
attribute
General Settings
description Adds a description string to the Security policy instance.
name Sets the name of the Security policy instance.
Encryption and Authentication Settings
encryption Enables or disables a data encryption type. Possible
values:
• open
• wep40
• wep128
• keyguard
• tkip
• ccmp
authentication Enables or disables an authentication type. Possible
values are:
• preshared
• kerberos
• eap
You can enter multiple authetication values in the CLI with
a space between each value.
Pre-Shared Key (PSK) Settings
presharedKey Sets the PSK key in either ASCII or Hexidecimal format. An
ASCII key must be between 8 and 63 characters long. A
hex key must be 64 characters.
WEP Settings
activeWepKey Sets the active WEP key string, identified by key index.
Valid key_index values are [0, 3].
Description
Note The WS5000 Series
Switch does not work with the
combination of wep40 encryption
and kerberos authentication.
8-247
CLI Command Reference
Syntax
set description <text_string>
set name <name_string>
set encryption <type> <enable>
set authentication <type> <enable>
set presharedKey
<ascii_or_hex_key>
set activeWepKey <key_index>