Service; Show - Symbol WS5000 Series System Reference Manual

Jan 25 15:35 18819400
Jan 25 14:05
WS5000>

8.3.10 service

System Context
Places the user in a Service Mode (for which a new password is required also). This is a command line mode
used mostly by Symbol technicians.
For more details on working within Service Mode, refer to the WS5000 Series Switch Troubleshooting Guide.

8.3.11 show

System Context
Show the settings for the specified system component. There are a number of ways to invoke the show
command:
• Invoked without any arguments, show displays information about the current context. If the current
context contains instances, then show command (usually) displays a list of these instances.
In the case of the System context, show displays all the possible show command variations. Use show
system command to show system information.
• Invoked with the display_parameter, it displays information about that component.
Syntax
WS5000.(Cfg)> show
Syntax: show <display_parameter>
Parameters
Table 8.4 lists and describes the display_parameters in the show command.
Table 8.4 show Command's display_parameter Summary
display_parameter
show aaa-server Displays AAA information
show accessports Displays details of all access ports
show accessports Displayss details of available access ports
available
show acl Displays ACL information
show allconfig Displays all configurations on the switch
show appolicy Displays Access Port Policy
show arp Displays arp cache
show autoinstalllog Displays autoinstall log
show ce Displays Classifiers
WS5000_v1.4.1.0-003D.sys.img
6517 cmd_template.sym
Description
8-15
CLI Command Reference
Example
page 8-17
page 8-17
page 8-18
page 8-18
page 8-18
page 8-18
page 8-18
page 8-18
page 8-19