Name; Restore - Symbol WS5000 Series System Reference Manual

Parameters
install_option One of:
• primary – Configures the switch to act as Primary, and applies all settings specified
• standby – Configures the switch to act as Standby, and applies all settings as
• kerberos – Updates the Kerberos principles from the settings in the filename file
filename Command (*.sym) or Kerberos (*.krb) file to execute, which contains configuration
settings.
Example
WS5000> install primary
Begin command file processing...

8.3.7 name

System Context
Use the name command to change the system name.
Syntax
name <system_name>
Parameters
system_name The new name of the switch.
Example
WS5000> name MiamiWS5000
Configuring name...
Status : Success.
MiamiWS5000>

8.3.8 restore

System Context
Restores the specified system image and/or configuration, and then resets (reboots) the system with the newly
restored image and/or configuration.
Syntax
restore <restore_option> <filename>
in the <filename> command file (.sym). If the command file is not specified, install
instead uses the default "command.sym" file, if present. If "command.sym" is also
not present, install will not change anything.
described for the primary parameter value.
(.krb), without reset.
8-13
CLI Command Reference