Hard Disk; Original Size Detecting Option; 10.5 Settings In The Administrator # Initialize; 10.6 Settings In The Counter - Konica Minolta bizhub 200 Service Manual

10. Tech. Rep. Mode
10.4.5

Hard Disk

1
• To set whether or not the HDD is mounted.
Functions * To mount HDD when enhance security mode is set ON, turn OFF the enhance security
mode first.
• To change the presence of HDD
Use
• [Yes] is automatically set when Hard Disk Format is executed.
• The default setting is "No".
Setting/
Procedure
* Turn OFF/ON the main power after setting is changed.
10.4.6

Original Size Detecting Option

Functions • To set whether or not the optional Original Size Sensors are mounted.
Use • Select [Yes] when the optional Original Size Sensors are mounted.
• The default setting is "No".
Setting/
Procedure

10.5 Settings in the Administrator # Initialize

• To initialize the administrator number.
Functions
* If enhance security mode is set ON, menu is not shown.
1
Use • To initialize the administrator number (12345678).
1. Call the Tech. Rep. Mode to the screen.
Setting/
2. Touch the [Administrator # Initialize].
Procedure
3. Select [Yes] and touch [Enter].

10.6 Settings in the Counter

10.6.1

Checking the counter reading

1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch [Check] and the specific counter key whose reading is to be checked.
10.6.2

Clearing readings of all counters at once

1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch the [Counter Reset].
4. Touch the counter keys to be cleared and then touch [OK].
10.6.3

Clearing the reading of a specific counter

1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch the specific counter key to be cleared and press the Clear key.
If the reading of a wrong counter key has been cleared, press the Interrupt key to undo
the clearing operation.
164
Yes "No"
Yes "No"
Confidential – for internal use only, do not distribute
Field Service Ver. 2.5 Jul. 2006