11. Tech. Rep. Mode
11.5.6
Original Size Detecting Option
Functions
• To set whether or not the optional Original Size Sensors are mounted.
Use
• Select [Yes] when the optional Original Size Sensors are mounted.
• The default setting is "No".
Setting/
Procedure
11.6 Settings in the Administrator # Initialize
Functions
• To initialize the administrator number.
Use
• To initialize the administrator number (00000000).
1. Call the Tech. Rep. Mode to the screen.
Setting/
2. Touch the [Administrator # Initialize].
Procedure
3. Select [Yes] and touch [Enter].
11.7 Settings in the Counter
11.7.1
Checking the counter reading
1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch [Check] and the specific counter key whose reading is to be checked.
11.7.2
Clearing readings of all counters at once
1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch the [Counter Reset].
4. Touch the counter keys to be cleared and then touch [OK].
11.7.3
Clearing the reading of a specific counter
1. Call the Tech. Rep. Mode to the screen.
2. Touch the [Counter].
3. Touch the specific counter key to be cleared and press the Clear key.
If the reading of a wrong counter key has been cleared, press the Interrupt key to undo
the clearing operation.
11.7.4
Paper
Functions
• To display the number of sheets used for each paper size and each paper type.
To clear the data for any counter.
Use
Checking the counter reading
Setting/
160
Clearing the counter reading (all and a specific one)
Procedure
160
160
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Yes
"No"
Field Service Ver. 1.0 Aug. 2005