Figure 62: Reinstalling A Power Supply - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide
Related
Documentation
108
Twist the ejector handles at the upper corners of the power supply faceplate clockwise
5.
until they stop.
Tighten the captive screws at the lower corners of the power supply faceplate to
6.
secure the power supply in the chassis.
Repeat the procedure for the upper power supply.
7.

Figure 62: Reinstalling a Power Supply

T640 Preventing Electrostatic Discharge Damage on page 386
T640 Router Installation Summary on page 85
T640 Installation Safety Guidelines on page 390
Copyright © 2013, Juniper Networks, Inc.