Juniper T640 Hardware Manual page 52

T640 Core Router Hardware Guide
Table 4: Identifying the FPCs Supported by the T640 Router (continued)
Label on the FPC
FPC Faceplate
FPC3 None
Enhanced FPC3
E FPC3
Enhanced II FPC3 E-11 FPC3
Enhanced Scaling FPC3
T640-FPC3-ES
T640
FPC4
Enhanced Scaling
FPC4
T640
T640-FPC4–1P-ES
Enhanced Scaling
FPC4-1P
20
Location of PIC Offline Button
Inside an opening directly on the
faceplate of each PIC
Inside an opening directly on the
faceplate of each PIC
Inside an opening directly on the
faceplate of each PIC
Inside an opening directly on the
faceplate of each PIC
Inside an opening directly on the
faceplate of each PIC
Inside an opening directly on the
faceplate of each PIC
Method of Securing the
PIC to the FPC
Plastic ejector handle at the
top of the PIC faceplate;
captive screw at the
bottom of the PIC faceplate
Two plastic ejector handles
at the top and bottom of
the PIC faceplate
Two plastic ejector handles
at the top and bottom of
the PIC faceplate
Two plastic ejector handles
at the top and bottom of
the PIC faceplate
Two plastic ejector handles
at the top and bottom of
the PIC faceplate
Two plastic ejector handles
at the top and bottom of
the PIC faceplate
Copyright © 2013, Juniper Networks, Inc.