APPENDIX F
T640 Router Cable Connector Pinouts
T640 RJ-45 Connector Pinouts for the Routing Engine ETHERNET Port
Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
T640 RJ-45 Connector Pinouts for the Routing Engine ETHERNET Port on page 449
T640 DB-9 Connector Pinouts for the Routing Engine AUXILIARY and CONSOLE
Ports on page 450
T640 RJ-48 Connector Pinouts for the SCG EXTERNAL CLOCK INPUTS Ports on page 450
The port on the CIP labeled
second (Mbps) Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting
the Routing Engine to a management LAN (or other device that supports out-of-band
management).
Table 73 on page 449
Table 73: RJ-45 Connector Pinouts
Pin
Signal
1
TX+
2
TX –
3
RX+
4
Termination network
5
Termination network
6
RX–
7
Termination network
8
Termination network
T640 Connector Interface Panel (CIP) Description on page 56
Connecting the T640 Router to a Network for Out-of-Band Management on page 138
T640 Routing Engine Interface Cable and Wire Specifications on page 448
is an autosensing 10/100 millions of packets per
ETHERNET
describes the RJ-45 connector pinouts.
449