Figure 68: Reinstalling A Power Supply - Juniper T640 Hardware Manual

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Using both hands, slide the power supply into the chassis until you feel resistance.
4.
Twist the ejector handles at the upper corners of the power supply faceplate clockwise
5.
until they stop.
Tighten the captive screws at the lower corners of the power supply faceplate to
6.
secure the power supply in the chassis.
Repeat the procedure for the upper power supply.
7.

Figure 68: Reinstalling a Power Supply

T640 Preventing Electrostatic Discharge Damage on page 506
T640 Router Installation Summary on page 151
T640 Installation Safety Guidelines on page 511
Chapter 18: Installing the T640 Router With a Mechanical Lift
177