Replacing T640 Pic Cables; Figure 169: Installing A Pic - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide

Replacing T640 PIC Cables

298
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot online
For more information about the command, see request chassis pic.
The normal functioning status LED confirms that the PIC is online. You can also verify
correct PIC functioning by issuing the

Figure 169: Installing a PIC

Removing and installing PIC cables do not affect router function, except that a PIC does
not receive or transmit data while its cable is disconnected. To replace a PIC cable, ,
perform the following procedures:
Removing a T640 PIC Cable on page 299
1.
2. Installing a T640 PIC Cable on page 299
show chassis fpc pic-status
Copyright © 2013, Juniper Networks, Inc.
command.