Management Ports; Figure 33: Cip - Juniper T640 Hardware Manual
Core router
Hide thumbs
Also See for T640:
- Hardware manual (580 pages) ,
- Quick start manual (52 pages) ,
- Replacing (31 pages)
Table of Contents
Advertisement
Chapter 3: T640 Router Hardware Component Overview
Figure 33: CIP
The front electrostatic discharge point is located near the bottom of the CIP. The CIP is
located at the left side of the FPC card cage.
The CIP is hot-pluggable.
Management Ports
The CIP has two sets of ports that you use to connect the Routing Engines to external
management devices. From these management devices, you can use the CLI to configure
the router.
Copyright © 2013, Juniper Networks, Inc.
57
Advertisement
Table of Contents
Troubleshooting
