Figure 209: Rear Of The Dc Power Supply Showing Midplane Connectors - Juniper T640 Hardware Manual

Copyright © 2013, Juniper Networks, Inc.
Place one hand underneath the power supply to support it, and slide it completely
12.
out of the chassis.
WARNING: Do not touch the power connectors on the rear of the power
supply (see Figure 209 on page

Figure 209: Rear of the DC Power Supply Showing Midplane Connectors

Repeat the removal procedure for the other DC power supply before you install the
13.
AC power supplies.
Figure 210 on page 348 shows disconnecting the DC power cables from a two-input 160-A
DC power supply.
Chapter 17: Replacing T640 Router Hardware Components
347). They can contain dangerous voltages.
347