Installing The T640 Router Without A Mechanical Lift; Overview Of Installing The T640 Router Without A Mechanical Lift; Lift; Tools And Parts Required To Install The T640 Router Without A Mechanical - Juniper T640 Hardware Manual

CHAPTER 10
Installing the T640 Router Without a
Mechanical Lift

Overview of Installing the T640 Router Without a Mechanical Lift

Copyright © 2013, Juniper Networks, Inc.
Overview of Installing the T640 Router Without a Mechanical Lift on page 109

Tools and Parts Required to Install the T640 Router Without a Mechanical

Lift on page 110
Removing Components from the T640 Chassis on page 110
Installing the T640 Chassis in the Rack Manually on page 120
Reinstalling Components in the T640 Chassis on page 123
To install the T640 router without a mechanical lift:
Review the safety information. To avoid harm to yourself or the router as you install
1.
it, follow the safety guidelines and procedures for working with routers. However,
providing an exhaustive set of guidelines for working with electrical equipment is
beyond the scope of this documentation.
See "General Safety Guidelines for Juniper Networks Devices" on page
Installation Safety Guidelines" on page 390
Verify that the site has been prepared for the router installation.
2.
See "T640 Site Preparation Checklist" on page
Verify that the mounting hardware has been installed.
3.
See"Installing the T640 Mounting Hardware for an Open-Frame Rack" on page 96
or"Installing the T640 Mounting Hardware for a Four-Post Rack or Cabinet" on page
Remove the router from the shipping crate.
4.
See Unpacking the T1600 Router.
Gather the tools required to install the router.
5.
See "Tools and Parts Required to Install the T640 Router Without a Mechanical Lift"
on page 110.
Remove components from the chassis to make it easier to install into the rack or
6.
chassis.
383,
81.
and"T640
93.
109