Network Installation
6.
Select the required disk (if necessary) where you want to install the printer. Click [Continue].
7.
Click [Install].
8.
Click [Close], and restart the workstation.
9.
When the workstation has restarted, double click the hard drive icon.
10. Double-click the [Applications] icon.
11. Double-click the [Utilities] folder.
12. Double-click [Print Center] icon.
13. Double-click [Add] to add a new printer.
14. Select AppleTalk as your network protocol.
15. Select the required AppleTalk zone.
16. Select the printer that you wish to set up.
17. Select the Printer Model (that is, choose the PPD for your printer).
18. Click [Add].
19. Print a document from an application to verify that the printer is installed correctly.
View the Macintosh Printer Utility on the Internet Services Print and Fax Drivers CD.
The device Internet Services is a suite of applications used for installing, maintaining and using the
Xerox devices. The device Internet Services Macintosh Printer Utility is a Internet Services application
that enables network administrators to rename and rezone Xerox systems that are configured for
AppleTalk connectivity. Locate the Internet Services Print and Fax Drivers CD-ROM delivered in the
Internet Services Network Services Pack with your device follow the instructions contained in the
Internet Services Print and Fax Drivers Guide for Macintosh.
Apple Macintosh (TCP/IP)
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
•
An existing operational TCP/IP network with Macintosh workstation computers equipped with
Ethernet network interface cards.
•
Macintosh Operating System of 10.x or higher.
•
A live network drop and Ethernet Cable for the Macintosh workstation.
•
The printing device should already be configured with a static IP address (preferred), Subnet
Mask, and Gateway Address, as well as with a Host Name.
•
The Internet Services Print and Fax Drivers CD (delivered with your device). Review any README
file contained with the print drivers.
Enabling TCP/IP on the device
1.
At your Workstation, open the web browser and enter the IP address of the device in the Address
bar, and press [Enter].
2.
Click the [Properties] tab.
3.
If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].
Click on the [Login] button.
4.
92
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide